home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HAM Radio 3.2
/
Ham Radio Version 3.2 (Chestnut CD-ROMs)(1993).ISO
/
kenwood
/
ken_mods
/
ts940.14
< prev
next >
Wrap
Text File
|
1990-09-05
|
868b
|
18 lines
TS940.14
Since receiving the bulletin from Kenwood, I have installed
it on my TS-940S and found it to make a very significant
improvement in weak signal handling in the presence of nearby
strong signals. I would recommend highly that anyone
experiencing receprocal mixing problems install the new fix.
It should be noted that some of the newer TS-940S have the
fix installed. I was preparing to install the fix on a
friends's TS-940 which had a serial number 100 lower than my
own and found that the fix had been factory installed.
Apparently, more than one manufacturing site is used and
serial numbers are given to each in blocks. Consequently, it
is possible for higher serial numbers to be produced at one
location without the fix, while another site any have cut in
the fix but is using numbers from a lower block.
CONTINUED IN FILE TS940.12